Stop pumping completions into drained rock
Fracture-driven interference is a capital problem , the completion you planned goes into rock that's already been produced, while the reserves you came for never get contacted. FDai catches FDI in real time and adjusts the design while the stage is still pumping, so every dollar of completion capital goes to work in new rock.
Watch
Same Design In, a Different Plan Out
Two and a half minutes on fracture-driven interference , why completions get pumped into drained rock, and how FDai changes the plan while the stage is still pumping.
Real-Time Detection
Automated FDI Analysis
Every frac hit is automatically detected, classified, and quantified , giving operators the intelligence to act in real time.
Predicted Pressure Response
FDai automatically detects the stage and frac hit, then predicts what the pressure response would have been had the FDI not occurred , giving operators a true estimate of FDI magnitude rather than relying on raw pressure change alone.
Event-Level Metrics
Every detected event is enriched with key diagnostics: volume to first response, maximum pressure change rate, azimuth-based distance calculations from child to parent, and FDI velocity , building a complete picture of each interaction.
Decision-Ready Intelligence
These metrics feed directly into decision tree frameworks, enabling operators to take real-time action on the frac plan , adjusting rates, shutting down, or continuing with confidence based on quantified severity rather than guesswork.
Visualization
3D Diagnostic Dashboard
Explore frac diagnostics in a fully interactive 3D environment , pinpoint events across stages, wells, and time.
Features
Key Capabilities
Monitor Every Offset From the Wellhead
Every offset well on the pad, monitored in real time at the wellhead , no downhole gear, no intervention. Interference is detected at 50 PSI, not 500 PSI, while there's still time to change the plan.
Route Actions Straight to the Frac Van
When an FDI happens, FDai characterizes it , severity, speed, timing , and routes it to the pressure pumper's control system to take action, closing the loop between detection and the design being pumped.
Your Rules, Evaluated Live
The operator sets the rules before the job; FDai evaluates them while the stage is pumping. Offsets stay quiet? Upsize the design , that capital is working. Fast, early interference? Downsize , that stage was headed into drained rock. Too weak or too late to matter? Leave it alone.
Put Capital Back Into New Rock
An FDI sends the completion you planned into rock that's already been produced, while the reserves you came for never get contacted. Responding stage by stage cut interference 60% under controlled conditions.
Results
Proven in the Field
An operator deployed FDai for real-time FDI monitoring and stage-by-stage design response across a multi-well development program, achieving significant reductions in interference severity and per-pad operational savings.
0%
Decrease in Frac Hit Magnitude
0.0 hrs
Pump Time Saved Per Pad
0 gal
Water Saved Per Pad
0 gal
Diesel Saved Per Pad
See FDai in Action
Schedule a 30-minute walkthrough and see how FDai works on real well data.